TOLL FREE 888-869-2424
southwick & meister
 

HANWHA CNC SWISS TURNING CENTERS
QUICK REFERENCE GUIDE*
  
MACHINE HEAD STOCK
COLLET		 GUIDE
BUSHING		 DRILL
COLLET		 PICK-OFF
COLLET
HANEX 25 TF30 CD25 MPC11
MPC16		 TF30
ML12S TF16 SD125R MPC11
 		 TF16
ML20H (18H) TF25 TD25-NS MPC11
MPC16		 TF25
ML20S (18S) TF25 TD25-NS MPC11
MPC16		 TF25
ML26H TF30 CD25 MPC11
MPC16		 TF30
ML26S TF30 CD25 MPC11
MPC16		 TF30
SL12S TF16 SD125R MPC11
MPC16		 TF16
SL12SE TF16 SD125R MPC11
MPC16		 TF16
SL20H TF25 TD25-NS MPC11
MPC16		 TF25
SL20HP TF25 TD25-NS MPC11
MPC16		 TF25
SL20S TF25 TD25-NS MPC11
MPC16		 TF25
SL26H TF30 CD25 MPC11
MPC16		 TF30
SL26HP TF30 CD25 MPC11
MPC16		 TF30
SL26S TF30 CD25 MPC11
MPC16		 TF30
SL32HP TF37 TD32S MPC16 TF37
SL35 F40-SL35 TD45 VARIOUS MPC F40SL35


 

HANWHA CNC TURNING CENTERS
 
CAT. NO. REFERENCE DIMENSIONS INC. RANGE
D L a°
TF16 16MM
.630		 64MM
2.520		 16° 1/64
.001		 1/16 – 1/2
.030 – .500
TF25 25MM
.984		 77MM
3.032		 16° 1/32
.001		 1/8 – 13/16
.100 – .813
TF30 30MM
1.181		 80MM
3.150		 16° 1/16
.001		 3/16 – 1 in.
.150 – 1.000
TF37 37MM
1.456		 92MM
3.622		 16° 1/16
.001		 3/16 – 1 1/4
.200 – 1.250
F40-SL35 40MM
1.574		 92MM
3.622		 16° 1/16
.001		 3/16 – 1 3/8
.200 – 1.380
  NOTE:
1. Collets are available in standard and extra precision (XP) for critical    applications.

2. Collet bores 1/2 inch and larger are grooved for extra holding power.    Any variation must be specified when ordering.

3. When ordering pick-off collets, please specify smooth bore if    required.

4. If a collet used in a pick-off application requires an extended nose    length, use the suffix “EN” and refer to separate section for ordering    details.

5. Carbide lined collets have a wear life many times that of steel collets;    in addition, they resist “galling and scratching” of problem materials.
HEXAGON
CAT. NO. INC. RANGE
TF16HX 1/32 1/8 – 7/16
TF25HX 1/16 3/16 – 11/16
TF30HX 1/16 1/4 – 3/4
TF37HX 1/16 1/4 – 1-1/16
F40-SL35HX 1/16 1/4 – 1-1/8
SQUARE
CAT. NO. INC. RANGE
TF16SQ 1/32 1/8 – 11/32
TF25SQ 1/16 3/16 – 9/16
TF30SQ 1/16 1/4 – 11/16
TF37SQ 1/16 1/4 – 7/8
F40-SL35SQ 1/16 1/4 – 15/16
Hexagon and square collets and bushings are normally stocked in the increments (INC) listed. Odd size hexagon and square bores and other profile shapes are made to order. In these cases, it is requested that a stock sample be sent with the purchase order.


 

HANWHA CNC SWISS TURNING CENTERS
CAT. NO. REFERENCE DIMENSIONS INC. RANGE
D L a° THD. mm
SD125R 18mm
.709 		60mm
2.362		 30° 18 x 1 1/64
.001		 1/16 – 1/2
.030 – .500
TD25-NS 28mm
1.102		 82mm
3.228		 16° 25 x 1 1/32
.001		 1/8 – 3/4
.100 – .781
CD25 34mm
1.339		 87.5mm
3.445		 10° 34 x 1 1/16
.001		 3/16 – 1 in.
.100 – 1.000
TD32S 42mm
1.654		 82mm
3.228		 16° 40 x 1 1/16
.001		 3/16 – 1-1/4
.200 – 1.250
TD45 45mm
1.771		 82mm
3.228		 16° 42 x 1 1/16
.001		 3/16 – 1-3/8
.200 – 1.380
NOTE:
Generally guide bushings are used in stationary or revolving guide bushing holders. For profile material, revolving bushings are essential. However, in special cases where round stock is turned in revolving bushings and extreme concentricity between the stock and the turned diameters is required, extra precision (XP) bushings are available. These bushings command higher prices, longer deliveries, and should only be specified when the requirements justify their use.
HEXAGON
CAT. NO. INC. RANGE
SD125RHX 1/32 1/8 – 7/16
TD25-NSHX 1/16 3/16 – 11/16
CD25HX 1/16 1/4 – 3/4
TD32SHX 1/16 1/4 – 1-1/16
TD45HX 1/16 1/4 – 1-1/8
SQUARE
CAT. NO. INC. RANGE
SD125RSQ 1/32 1/8 – 11/32
TD25-NSSQ 1/16 3/16 – 9/16
CD25SQ 1/16 1/4 – 11/16
TD32SSQ 1/16 1/4 – 7/8
TD45SQ 1/16 1/4 – 5/16
CAT. NO. INC. RANGE
SD125R 1/16
.001 		1/16 – 1/2
.050 –.500
TD25-NS 1/16
.001 		1/8 – 3/4
.050 – .796
CAT. NO. INC. RANGE
CD25 1/16
.001 		3/16 – 1 in.
.100 – 1.000
TD32S 1/16
.001 		1/4 – 1-1/4
.200 – 1.250
TD45 1/16
.001 		1/4 – 1-3/8
.200 – 1.380
NOTE:
Meehanite is compatible with most materials, including those which have a high tendency to “pick-up”. However, meehanite has a wear life that is considerably shorter than that of carbide. Meehanite is supplied in round bore sizes only.

* When ordering please add a suffix of “ST” for steel bushing or “M” for meehanite bushing.


HOME