TOLL FREE 888-869-2424
southwick & meister
 

MAIER CNC SWISS TURNING CENTERS
 
QUICK REFERENCE GUIDE*

 
MACHINE HEAD STOCK
COLLET 		GUIDE
BUSHING 		DRILL/
MILL
COLLET 		TURN
TOOL
SHANK 		PICK-OFF
COLLET
ML-12A TF15 SD125R MPC11 12MM TF15
ML-12B TF15 SD125R MPC11 12MM TF15
ML-12C TF15 SD125R MPC11 12MM TF15
ML-12D TF15 SD125R MPC11 12MM TF15
ML-16A TF20 TD20R MPC11 12MM TF20
ML-16B TF20 TD20R MPC11 12MM TF20
ML-16C TF20 TD20R MPC11 12MM TF20
ML-16D TF20 TD20R MPC11 12MM TF20
ML-20A TF25 TD25S MPC16 16MM TF25
ML-20B TF25 TD25S MPC16 16MM TF25
ML-20C TF25 TD25S MPC16 16MM TF25
ML-20D TF25 TD25S MPC16 16MM TF25
ML-20E TF25 TD25S MPC16 16MM TF25
ML-26A F32-221 CD25 MPC16 16MM F32-221
ML-26B F32-221 CD25 MPC16 16MM F32-221
ML-26C F32-221 CD25 MPC16 16MM F32-221
ML-26D F32-221 CD25 MPC16 16MM F32-221
ML-26E F32-221 CD25 MPC16 16MM F32-221
ML-32A TF37 TD32S MPC16 16MM TF37
ML-32B TF37 TD32S MPC16 16MM TF37
ML-32C TF37 TD32S MPC16 16MM TF37
ML-32D TF37 TD32S MPC16 16MM TF37
ML-32E TF37 TD32S MPC16 16MM TF37


 

CAT. NO. REFERENCE DIMENSIONS INC. RANGE
D L a
TF15 15MM
.590 		64MM
2.620 		16 1/64
.001 		1/16-7/16
.030-.500
TF20 20MM
.787 		67MM
2.638 		16 1/32
.001 		1/8-5/8
.050-.630
TF25 25MM
.984 		77MM
3.032 		16 1/32
.001 		1/8-13/16
.100-.813
F32-221 32MM
1.250 		75MM
2.953 		15 1/16
.001 		1/4- 1-1/4
.200-1.062
TF37 37MM
1.456 		92MM
3.622 		16 1/16
.001 		1/4- 1-1/4
.200-1.250
NOTE:
1. Collets are avaliable in standard and extra precision (XP) for critical applications.

2. Collet bores 1/2 inch and larger are grooved for extra holding power. Any variation     must be specified when ordering.

3. When ordering pick-off collets, please specify smooth bore if required.

4. If a collet used in a pick-off application requires an extended nose length, use the suffix     "EN" and refer to seperate section for ordering details.

5. Carbide lined collets have a wear life many times that of steel collets; in addition, they     resist "galling and scratching" of problem materials.
 
 
HEXAGON
CAT. NO. INC. RANGE
TF15HX 1/32 1/8-3/8
TF20HX 1/16 1/8-1/2
TF25HX 1/16 3/16-11/16
F32-221HX 1/16 1/4-13/16
TF37HX 1/16 1/4- 1-1/16
SQUARE
CAT. NO. INC. RANGE
TF15SQ 1/32 1/8-11/32
TF20SQ 1/16 1/8-7/16
TF25SQ 1/16 3/16-9/16
F32-221SQ 1/16 1/4-3/4
TF37SQ 1/16 1/4-7/8
  Hexagon and square collets and bushings are normally stocked in the increments (INC) listed. Odd size hexagon and square boxes and other profile shapes are made to order in these cases, it is requested that a stock sample be sent with the purchase order.


 

CAT. NO. REFERENCE DIMENSIONS INC. RANGE
D L a THD. mm
SD125R 18mm
.709		 60mm
2.362		 30° 18 x 1 1/32
.001 		1/16 - 1/2
.030 - .500
TD20R 22mm
.866		 68mm
2.677		 16° 22 x 1 1/32
.001 		1/8 - 5/8
.050 - .630
TD25S 28mm
1.102		 82mm
3.228		 16° 25 x 1 1/32
.001 		1/8 - 3/4
.100 - .781
CD25 34mm
1.339		 87.5mm
3.445		 10° 34 x 1 1/16
.001 		3/16 - 1.000
.200 - 1.000
TD32 42mm 1.654 82mm
3.228		 16° 40 x 1 1/16
.001 		1/4 - 1 1/4
.200 - 1.250
NOTE:
Generally, guide bushings are used in stationary or revolving guide bushing holders. For profile material, revolving bushings are essential. However, in special cases where round stock is turned in revolving bushings and extreme concentricity between the stock and the turned diameters is required, extra precision (XP) bushings are available. These bushings command higher prices, longer deliveries, and should only be specified when the requirements justify their use.
 

CAT. NO. INC. RANGE
SD125RHX 1/32 1/8 - 7/16
TD20RHX 1/16 1/8 - 1/2
TD25SHX 1/16 3/16 - 11/16
CD25HX 1/16 1/4 - 3/4
TD32HX 1/16 1/4 - 1 1/16
CAT. NO. INC. RANGE
SD125RSQ 1/32 1/8 - 11/32
TD20RSQ 1/16 1/8 - 7/16
TD25SRQ 1/16 3/16 - 9/16
CD25SQ 1/16 1/4 - 11/16
TD32SQ 1/16 1/4 - 7/8

Hexagon and square collets and bushings are normally stocked in the increments (INC) listed. Odd size hexagon and square bores and other profile shapes are made to order. In these cases, it is requested that a stock sample be sent with the purchase order.
CAT. NO. INC. RANGE
SD125R 1/16
.001 		1/16 - 1/2
.050 - .500
TD20R 1/16
.001 		1/8 - 5/8
.100 - .630
TD25S 1/16
.001 		1/8 - 3/4
.100 - .796
CAT. NO. INC. RANGE
CD25 1/16
.001 		3/16 - 1in.
.100 - 1.000
TD32 1/16
.001		 1/4 - 1 1/4
.200 - 1.250
NOTE:
Meehanite is compatible with most materials, including those which have a high tendency to "pick up". However, meehanite has a wear life that is considerably shorter than that of carbide. Meehanite is supplied in round bore sizes only.

*When ordering please add a suffix of "ST" for steel bushing or "M" for meehanite bushing.


HOME