TOLL FREE 888-869-2424
southwick & meister

TORNOS CNC TURNING CENTERS
   
MACHINE HEAD STOCK
COLLET		 GUIDE
BUSHING		 DRILL
SLEEVE
COLLET		 CROSS
DRILL
COLLET		 PICK-OFF
COLLET
ENC74 TF13 TD10 MPC12 MPC12 TF13
ENC162 TF15
F20-201		 0201 MPC16
MPC25		 WJ#3  
ENC164 TF15
F20-201		 0201 MPC16
MPC25		 WJ#3 TF15
F20-201
ENC262 TF25
0161		 T200 MPC16
MPC25		 MPC25  
ENC264 TF25
0161		 T200 MPC16
MPC25		 MPC25 TF25
161
ENC167 TF25 TD25/167 MPC12/16/20 MPC 12/16/20 TF25
TOP100 TF16 TD10TXP
TD18TXP		 MPC16
MPC25		 MPC12
MPC25		 TF13
TOP200 0161 T200 MPC16
MPC20
MPC25		 MPC20
MPC25		 TF25
0161
TMB26 F32-221 SD255-36 MPC25
MPC32		 W-15  
ELECTOR16 F20-201 0201 AE4402 WJ#3  
DECO 2000
10mm		 TF13 TD10 MPC11/12 MPC11/12 TF13
DECO2000 13/16 F20-201 0201 MPC20 MPC20 F20-201
DECO 2000
20mm		 TF25 TD25/167 MPC25 MPC25 TF25
DECO 2000
25.4mm		 0161 CD25 MPC25 MPC25 0161
DECO 2000
26/32mm		 TF37 TD32S MPC25 MPC25 TF37

* Refer to separate section in this catalog for MPC attachment collets.

 
CAT. NO. REFERENCE DIMENSIONS INC. RANGE
D E L a°
TF8 8mm
.315		 12mm
.472		 41mm
1.614		 16 1/64
.001		 1/16 – 1/4
.018 – .250
TF10 10mm
.393		 16mm
.630		 47mm
1.850		 20 1/64
.001		 1/16 – 9/32
.018 – .281
TF13 13mm
.512		 19mm
.748		 64mm
2.520		 16 1/64
.001		 1/16 – 3/8
.030 – .393
AE4402 14mm
.550		 18mm
.709		 46mm
1.811		 13 1/64
.001		 1/32 – 3/8
.030 – .393
TF15 15mm
.590		 21mm
.827		 64mm
2.520		 16 1/64
.001		 1/16 – 7/16
.030 – .500
TF16 16mm
.630		 21mm
.827		 64mm
2.520		 16 1/64
.001		 1/16 – 1/2
.030 – .500
F20-201 20mm
.787		 26mm
1.024		 54mm
2.126		 15 1/32
.001		 1/2 – 5/8
.062 – .630
TF25 25mm
.984		 35mm
1.38		 77mm
3.032		 16 1/32
.001		 1/8 – 3/16
.120 – .813
0161 30mm
1.181		 38mm
2.559		 65mm
1.496		 15 1/16
.001		 1/4 –1’’
.200 – 1.000
F32-221 32mm
1.260		 45mm
1.771		 75mm
2.953		 15 1/16
.001		 1/4 – 1 1/4
.200 – 1.062
TF37 37mm
1.456		 47mm
1.850		 92mm
3.622		 16 1/16
.001		 1/4 – 1 1/4
.200 – 1.250
NOTE:
  
1.
 Collets are normally stocked in the fractional increments shown. All other bores are made to order.
2.
 Collets are available in standard and extra precision (XP) for critical applications.
3.
 Head stock collet bores 1/2 inch and larger are grooved for extra holding power. Any variation must be specified when ordering.
4.
 When ordering pick-off collets, please specify smooth bore.
5.
 If a collet used in a pick-off application requires an extended nose length, use the suffix “EN” and refer to separate section for ordering details.
6.
 Carbide lined collets have a wear life many times that of steel collets; in addition, they resist “galling and scratching” of problem materials.

HEXAGON
CAT. NO. INC. RANGE
TF10HX 1/32 1/8 – 1/4
TF13HX 1/32 1/8 – 11/32
AE4402HX 1/32 1/8 – 11/32
TF15HX 1/32 1/8 – 3/8
TF16HX 1/32 1/8 – 7/16
F20-201HX 1/16 1/8 – 1/2
TF25HX 1/16 3/16 – 11/16
0161HX 1/16 1/4 – 3/4
F32-221HX 1/16 1/4 – 13/16
TF37HX 1/16 1/4 – 11/16
SQUARE
CAT. NO. INC. RANGE
TF10SQ 1/32 1/8 – 3/16
TF13SQ 1/32 1/8 – 9/32
AE4402SQ 1/32 1/8 – 9/32
TF15SQ 1/32 1/8 – 11/32
TF16SQ 1/32 1/8 – 11/32
F20-201SQ 1/16 1/8 – 7/16
TF25SQ 1/16 3/16 – 9/16
0161SQ 1/16 1/4 – 11/16
F32-221SQ 1/16 1/4 – 3/4
TF37SQ 1/16 1/4 – 7/8


 

TORNOS CNC TURNING CENTERS
   
CAT. NO. REFERENCE DIMENSIONS INC. RANGE
D L a° THD.
TD10 16mm
.630 		60mm
2.362		 16° 14 x 1 1/64
.001		 1/16 – 13/32
.030 – .406
TD10TXP 16mm
.630 		59mm
2.323		 16° 16 x 1 .001 .050 – .406
TD18TXP 18mm
.708 		100mm
3.937		 20° 18 x 1 .001 .070 – .500
0201 24mm
.945 		61mm
2.402		 30° 24 x 1 1/32
.001		 1/8 – 5/8
.100 – .630
TD25/167 28mm
1.102		 81mm
3.188		 30° 25 x 1 1/32
.001		 1/8 – 3/4
.100 – .781
T200XP 34mm
1.339		 150mm
5.906		 201/2° 32 x 1.5 .001 .100 – 1.000
CD25 34mm
1.339		 87.5mm
3.445		 10° 34 x 1 1/16
.001		 3/16 – 1 in.
.100 – 1.000
SD255-36 40mm
1.575		 71.5mm
2.815		 30° 36 x 1 1/16
.001		 1/4 – 1 1/16
.250 – 1.063
TD32S 42mm
1.654		 82mm
3.228		 16° 40 x 1 1/16
.001		 1/4 – 1 1/4
.200 – 1.250
NOTE:  
1. Bushings are normally stocked in the fractional increments (INC) shown. All other bores are made to order.
 
2. Carbide bushings are normally supplied in standard precision. In cases where extreme concentricity is required between the stock diameter and turned diameters, extra precision (XP) bushings are available.
 
3. In addition to carbide and steel, meehanite bushings are available. Meehanite is compatible with most materials, including those that have a high tendency to “Pick-Up”. However, meehanite has a wear life that is considerably shorter than carbide. Meehanite bushings are supplied in round bores only.
HEXAGON
CAT. NO. INC. RANGE
TD10HX 1/32 1/8 – 5/16
TD10THX 1/32 1/8 – 5/16
TD18THX 1/32 1/8 – 7/16
0201HX 1/16 3/16 – 9/16
TD25/167HX 1/16 3/16 – 11/16
T200HX 1/16 1/4 – 13/16
CD25HX 1/16 1/4 – 3/4
SD255-36HX 1/16 1/4 – 7/8
TD32SHX 1/16 1/4 – 1 1/16
SQUARE
CAT. NO. INC. RANGE
TD10SQ 1/32 1/8 – 9/32
TD10TSQ 1/32 1/8 – 9/32
TD18TSQ 1/32 1/8 – 11/32
0201SQ 1/16 3/16 – 1/2
TD25/167SQ 1/16 3/16 – 9/16
T200SQ 1/16 1/4 – 11/16
CD25SQ 1/16 1/4 – 11/16
SD255-36SQ
 		 1/16 1/4 – 3/4
TD32SSQ
 		 1/16 1/4 – 7/8


 

 
HEXAGON
CAT. NO. INC. RANGE
AS12115HX 1/16 1/8 – 7/16
AS12607HX 1/16 3/16– 9/16
BS12367HX 1/16 1/4– 11/16
HEXAGON
CAT. NO. INC. RANGE
AS12115SQ 1/16 1/8 – 3/8
AS12607SQ 1/16 3/16– 7/16
BS12367SQ 1/16 1/4– 9/16
 
CAT. NO. REFERENCE DIMENSIONS INC. RANGE
D E L THD.
AS621211 13mm
.512 		19mm
.748 		66
2.598 		INT
11X.75 		.001 .030 - .398
AS621025 16mm
.630 		21mm
.827 		66
2.598 		INT
12X.75 		.001 .030 - .500
BS621007 25mm
.984 		35mm
1.378 		77
3.032 		INT
22X1 		.001 .100 - .787

NOTE
1. All pick-off collets are made with smooth bores unless otherwise specified.

2. If an ejector pin assembly is required. Specify when ordering collet. Example: SAS16-AS621025 - with ejector assembly.

 


 
 
CAT. NO. REFERENCE DIMENSIONS INC. RANGE
D E L
AS1265 17.9mm
.705 		70mm
2.756 		16X.75 1/16
.001 		1/8– 9/16
.100– .562
AS12611 22.9mm
.898		 98mm
3.858		 20X.75 1/16
.001		 3/16 – 5/8
.150– ..630
BS12369 27.7mm
1.091 		116mm
4.567 		25X1 1/16
.001		 1/4– 13/16
.200– .826

NOTE
1. Hexagon and Square Feed Fingers are avaliable in the same size range as the matching headstock collets. Use the catalog number with suffix HX or SQ when ordering.

2. Unless otherwise specified, feed fingers are supplied with normal tension. If extra "light" or "heavy" tension is required be noted when ordering.

 

MACHINE
FEED FINGER
SPINDLE COLLET
PICK-OFF COLLET
20/6
DMFF20/6
DMCOL20/6
DMPO28
20/6
DMFF20/6
DMCOL20/6
DMPO28
26/6
DMFF26/6
DMCOL26/6
DMPO35.5
 
REFERENCE DIMENSIONS
CAT. NO.
A
B
L
THREAD
DMFF20/6
.969
.984
3.543
24 X 1
DMFF26/6
1.299
1.378
4.646
33 X 1.5
 
REFERENCE DIMENSIONS
CAT. NO.
A
B
L
THREAD
DMCOL20/6
1.3385
3.543
1.654
30X1mm LH
DMCOL26/6
1.811
4.724
2.378
40X1.5mm LH
 
REFERENCE DIMENSIONS
CAT. NO.
D
L
A
DMPO28
1.1024
2.874
1.260
DMPO35.5
1.3976
3.150
1.575


HOME