TOLL FREE 888-869-2424
southwick & meister
 

TSUGAMI CNC TURNING CENTERS
QUICK REFERENCE GUIDE*
  
TSUGAMI
NAME		 REM
NAME		 HEAD
STOCK
COLLET		 GUIDE
BUSHING		 CROSS
DRILL
COLLET		 FACE
DRILL
COLLET		 HIGH
SPEED
DRILL
COLLET		 CROSS
TAP		 VERT.
DRILL		 SUB-
SPINDLE
B007 B007 TF10 TD7 MPC11 MPC11 — — — TF10
BW07   TF10 TD7 MPC11 MPC11 — — — TF10
NT11 ST400 TF15 SD125R — — — — — —
NT11S NT11S TF15 SD125R — — — — — —
NP11 ST400P TF15 SD125R — MPC12 — — — TF15
BS12/BO12 BX12 TF24 TSG20R MPC11/16 MPC11/16 — — — TF24
BS12/BO12 BZ12 TF24 TSG20R MPC11/16 MPC11/16 — — — TF24
BS12/BO12V BS12/BO12V TF24 TSG20R MPC11/16 MPC11/16 — — — TF24
BE12III BE12III TF24 TSG20R MPC11/16 MPC11/16 — — — TF24
BN12 BN12 TF24 TSG20R MPC11/16 MPC11/16 — — — TF24
BW12 BW12 TF24 TSG20R MPC16/20 MPC11 — — — TF24
BU12 BU12 TF24 TSG20R MPC16/20 MPC11/16 — — — TF24
NT12 ST500 TF20 TD20
TD20R		 MPC12 MPC12 TF8 TF8 MPC16 —
NT16 ST600 TF20 TD25 MPC12 MPC12 TF8 TF8 MPC12 —
NP16 ST600P TF20 TD25 MPC12 MPC12 TF8 TF8 MPC16 TF20
NMP1611 ST600MARKII TF20 TD25 MPC12 MPC12 TF8 TF8 MPC16 TF20
S16D S16D TF24 TSG20R MPC12 MPC12 — — — TF24
S16H S16H TF24 TSG20R MPC12 MPC12 — — — TF24
S16P S16P TF24 TSG20R MPC12 MPC12 — — — TF24
NT17 ST700 TF24 TSG20R — — — — — —
NT17S NT17S TF24 TSG20R — — — — — —
NP17 ST700P TF24 TSG20R MPC12 MPC12 — — — TF24
BS18/BO18 BX18 TF24 TSG20R MPC11 MPC11 — — — TF24
BS19 BS19 TF25 TD25 MPC11 MPC11 — — — TF25
BE19 BE19 TF25 TD25 MPC11/16 MPC11 — — — TF25
NT20 ST800 TF25 TD25 MPC16 MPC16 — — MPC16/20 —
NP20I ST800P TF25 TD25 MPC16 MPC16 — — MPC16/20 TF25
NP20II ST800MARK II TF25 TD25 MPC16 — — — — TF25
NP20III NP20III TF25 TD25 MPC16 — — — — TF25
S20P S20P TF25 TD25 — — — — — TF25
BS20A SX20A TF25 TD25 MPC16/20 — — — — TF25
S20D S20D TF25 TD25 MPC16 — — — — TF25
BS20B SX20B TF25 TD25 MPC16/20 — — — — TF25
BS20C SX20C TF25 TD25 MPC16/20 — — — — TF25
BS20V BS20V TF25 TD25 MPC16/20 — — — — TF25
SS20 SS20 TF25 TD25 MPC16/20 — — — — TF25
BU20   TF25 TD25 MPC16/20 — — — — TF25
BH20 BH20 TF25 TD25 MPC16/20 — — — — TF25
S20H S20H TF25 TD25 MPC16 — — — — TF25
BE20III BE20III TF25 TD25 MPC11/16 — — — — TF25
BE20V BE20V TF25 TD26/TD25 MPC11/16 — — — — TF25
NT25 ST1000 TF37 TD32 MPC16 MPC16 — — MPC16/20 —
S25P S25P 0166 CD25 MPC16 MPC16 — — — 0166
S25D S25D 0166 CD25 MPC16 MPC16 — — — 0166
S25H S25H 0166 CD25 MPC16 MPC16 — — — 0166
BS26 SX26 0166 CD25 MPC16/20 MPC16 — — — 0166
BA26 BA26 0166 TD33 MPC16 MPC16 — — — 0166
BS32 BS32 BS32C BS32B MPC16/20 MPC16 — — — BS32C
NT32 ST1250 TF37 TD32 MPC16 MPC16 — — MPC16/20 —
NP32 ST1250P TF37 TD32 MPC16 MPC16 — — MPC16/20  
NP32II ST1250MARK II TF37 TD32 MPC16 MPC16 — — MPC16/20 TF37
NP32III NP32III TF37 TD32 MPC16 MPC16 — — MPC16/20 TF37
SS32 SS32 TF37 TD32 MPC16/20 MPC16 — — — TF37
NU4Y NEW — — — — —   MPC16/20 —
MERCURY MERCURY NA — MPC16 MPC16 — — MPC16/20 —
FA45 FA45 NA — MPC32 MPC32 MPC32 — — PKFA45
FA65 FA65 NA — MPC32 MPC32 MPC32 — — PKFA65
MB385/4 MB385/4 16C — MPC16 MPC16 — — — BS38
BU26S/SY BU26S/SY 0166 CD25 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 0166
BH38 BH38 TF43 STM38 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 BS38
BU38S/SY BU38S/SY TF43 STM38 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 BS38
MU26S/SY MU26S/SY 0166 CD25 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 0166
MU38S/SY MU38S/SY TF43 STM38 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 BS38
TMU1 TMU1 TF43 STM38 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 Various
MPC		 BS38

— Not Applicable.
NA - Not Available through Southwick & Meister.
 
BX and BZ Machines have 3 levels. Level 1: Does not have a pick-off unit. Level 2: Does have a pick-off unit. Level 3: Has a pick-off unit and cross working tools utilizing MPC11/16 collets.
 
NOTE:
Use column #1, TSUGAMI NAME, when referring to machine models.
Refer to separate section in this catalog for MPC attachment collets.

 
   

CAT. NO. REFERENCE DIMENSIONS INC. RANGE
D L a°
TF8 8mm
.315 		41mm
1.614		 16° 1/64
.001		 1/16 – 1/4
.018 – .250
TF15 15mm
.590 		64mm
2.520		 16° 1/64
.001		 1/16 – 7/16
.030 – .500
TF20 20mm
.787 		67mm
2.638		 16° 1/32
.001		 1/8 – 5/8
.050 – .630
TF24 24mm
.944 		62mm
2.440		 15° 1/32
.001		 1/8 – 11/16
.062 – .687
TF25 25mm
.984		 77mm
3.032		 16° 1/32
.001		 1/8 – 13/16
.100 – .813
0166 34mm
1.260		 65mm
2.559		 15° 1/16
.001		 3/16 – 1.00
.100 – 1.00
BS32C 37mm
1.456		 91mm
3.583		 16° 1/16
.001		 1/4 – 1 1/4
.200 – 1.250
TF37 37mm
1.456		 92mm
3.622		 16° 1/16
.001		 1/4 – 1 1/4
.200 – 1.250
TF43 43mm
1.693		 92mm
3.622		 16° 1/16
.001		 1/4 – 1 1/2
.250 – 1.500
PKFA-45 44mm
1.732		 75mm
2.953		 15° .001 .500 – 1.500
PKFA-65 44mm
1.732		 75mm
2.953		 15° .001 1.000 – 2.500
BS38 48mm
1.889		 100mm
3.937		 15° .001 1/4 – 1 1/2
.200 – 1.550
16C** 48mm
1.889 		114.7mm
4.515 		10° .001 1/4 – 1 5/8
.200 – 1.625

**Internal Thread 1 1/4 - 20NS
and External Thread1.870 X 1.175mm
 
NOTE:  
1. Collets are available in standard and extra precision (XP) for critical applications.
 
2. Head stock collet bores 1/2 inch and larger are grooved for extra holding power. Any variation must be specified when ordering.
 
3. When ordering pick-off collets, please specify smooth bore.
 
4. If a collet used in a pick-off application requires an extended nose length, use the prefix “EN” and refer to separate section for ordering details.
 
5. Carbide lined collets have a wear life many times that of steel collets; in addition, they resist “galling and scratching” of problem materials.
 
HEXAGON
CAT. NO. INC. RANGE
TF15HX 1/32 1/8 – 3/8
TF20HX 1/32 1/8 – 1/2
TF24HX 1/16 3/16 – 9/16
TF25HX 1/16 3/16 – 11/16
0166HX 1/16 1/4 – 7/8
TF37HX 1/16 1/4 – 1 1/16
TF43HX 1/16 1/4 – 1 1/4
BS32CHX 1/16 1/4 – 1 1/16
BS38HX 1/16 1/4 – 1 3/8
16CHX 1/16 1/4 – 1 3/8
SQUARE
CAT. NO. INC. RANGE
TF15SQ 1/32 1/8 – 11/32
TF20SQ 1/32 1/8 – 7/16
TF24SQ 1/16 3/16 – 1/2
TF25SQ 1/16 3/16 – 9/16
0166SQ 1/16 1/4 – 3/4
TF37SQ 1/16 1/4 – 7/8
TF43SQ 1/16 1/4 – 1/1
BS32CSQ 1/16 1/4 – 7/8
BS38SQ 1/16 1/4 – 1 1/16
16CSQ 1/16 1/4 – 1 1/16


 


 
CAT. NO. REFERENCE DIMENSIONS INC. RANGE
D L a° THD. mm
TD7 11mm
.433		 53mm
2.087		 16° 10 x .75 1/64
.001		 1/16 – 1/4
.030 – .265
SD125R 18mm
.630		 60mm
2.362		 30° 18 x 1 1/64
.001		 1/16– 1/2
.030 – .500
TD20 22mm
.866 		68mm
2.677		 16° 19 x 1 1/32
.001		 1/8 – 1 7/32
.050 – .532
TD20R 22mm
.866 		68mm
2.677		 16° 22 x 1 1/32
.001		 1/8 – 5/8
.050 – .630
TSG20R 23mm
.905 		72mm
2.834		 16° 22 x 1 1/32
.001		 1/8 – 11/16
.062 – .687
TD25 28mm
1.102		 82mm
3.228		 30° 25 x 1 1/32
.001		 1/8 – 3/4
.100 – .781
TD26 26mm
1.024		 77mm
3.031		 16° 25 x 1 1/32
.001		 1/8 – 3/4
.100 – .781
CD25 34mm
1.339		 87.5mm
3.445		 10° 34 x 1 1/16
.001		 3/16 – 1 in.
.100 – 1.000
BS32B 41mm
1.614		 54mm
2.126		 10° 38 x 1 1/16
.001
 		 1/4 – 1 1/4
.200 – 1.250
TD32 42mm
1.654		 82mm
3.228		 20° 40 x 1 1/16
.001		 1/4 – 1 1/4
.200 – 1.250
TD33 30mm
1.181		 70mm
2.756		 16° 30 x 1 1/16
.001		 1/4 – 1 in.
.100 – 1.000
STM38 48mm
1.889		 82mm
3.228		 16° 46 x 1 1/16
.001		 1/4 – 1 1/2
.300 – 1.500
 
NOTE:  
  Generally guide bushings are used in stationary or revolving guide bushing holders. For profile material, revolving bushings are essential. However, in special cases where round stock is turned in revolving bushings and extreme concentricity between the stock and the turned diameters is required, extra precision (XP) bushings are available. These bushings command higher prices, longer deliveries, and should only be specified when the requirements justify their
HEXAGON
CAT. NO. INC. RANGE
TD7HX 1/32 1/8 – 1/4
SD125RHX 1/32 1/8 – 7/16
TD20HX 1/16 1/8 – 7/16
TD20RHX 1/16 1/8 – 1/2
TSG20RHX 1/16 3/16 – 1/2
TD25HX 1/16 3/16 – 11/16
CD25HX 1/16 1/4 – 3/4
BS32BHX 1/16 1/4 – 1 1/16
TD32HX 1/16 1/4 – 1 1/16
TD33HX 1/16 1/4 – 3/4
STM38HX 1/16 3/8 – 1 1/4
SQUARE
CAT. NO. INC. RANGE
TD7SQ 1/32 1/8 – 3/16
SD125RSQ 1/32 1/8 – 11/32
TD20SQ 1/16 1/8 – 3/8
TD20RSQ 1/16 1/8 – 7/16
TSG20RSQ 1/16 3/16 – 7/16
TD25SQ 1/16 3/16 – 9/16
CD25SQ 1/16 1/4 – 11/16
BS32BSQ 1/16 1/4 – 7/8
TD32SQ 1/16 1/4 – 7/8
TD33SQ 1/16 1/4 – 11/16
STM38SQ 1/16 3/8 – 1 1/4
 
Hexagon and square collets and bushings are normally stocked in the increments (INC) listed. Odd size hexagon and square bores and other profile shapes are made to order. In these cases, it is requested that a stock sample be sent with the purchase order.
CAT. NO. INC. RANGE
TD7 1/16
.001 		1/16– 1/4
.050 – .265
SD125R 1/16
.001 		1/16 – 1/2
.050 – .500
TD20 1/16
.001 		1/8 – 9/16
.100 – .562
TD20R 1/16
.001 		1/8 – 5/8
.100 – .650
TSG20R 1/16
.100 		1/8 – 11/16
.100 – .687
CAT. NO. INC. RANGE
TD25 1/16
.001 		1/8 – 3/4
.100 – .796
TD26 1/16
.001 		1/8 – 3/4
.100 – .750
CD25 1/16
.001		 3/16 – 1 in.
.100 – 1.250
BS32B 1/16
.001		 1/4 – 1 1/4
.200 – 1.250
TD32 1/16
.001		 1/4 – 1 1/4
.100 – 1.250
TD33 1/16
.001		 1/4 – 1 in.
.100 – 1.000
STM38 1/16
.001		 3/8 – 1 1/2
.300 – 1.500

NOTE:
Meehanite is compatible with most materials, including those which have a high tendency to “pick up”. However, meehanite has a wear life that is considerably shorter than that of carbide. Meehanite is supplied in round bore sizes only.

*When ordering please add a suffix of “ST” for steel bushing or “M” for meehanite bushing.


HOME